Lazyboy Ratcheting Recline (How it Works, Assembly, Parts & Repair) (2024)

If you have a Lazyboy recline chair, you will probably notice it gives a clunk-like sound once you try to recline. That happens due to the presence of a Ratcheting assembly. A Ratcheting assembly allows your chair to recline permanently when you level up the footrest. Let’s take a deep dive into how this works.

How Lazyboy Ratcheting Works

Here’s how the Lazyboy ratcheting recline works. You get to operate the ratchet using a level placed by the side of the recliner chair. It is necessary to pull the lever in a counterclockwise position to control the leg rest in three different views.

The first view allows for relaxed reading while the second position of the leg rest allows television view and the complete position gives a total relaxation. When you apply pressure to rest your back entirely, the lazy boy ratcheting feature gives a clunking sound. This moves along with the way you adjust the recliner’s lever.

There are two components responsible for the sound pitch of ratcheting recline. The components are ratcheting pawl and sub-assembly. The ratcheting pawl is accountable for the recliner’s movement in a single direction. As a side note, remove obstacles and provide a clear path around the recliner to prevent accidents.

Here’s a Youtube video showing how it works

Lazyboy Ratchet Replacement and Repair

If your recliner doesn’t seem to stay in a fixed position once you recline, then it’s high time you replace or repair the ratcheting assembly.

1. First off, turn the recliner upside down and expose the underside. You will see that the ratchet Pawl is attached to a wooden floor base while the pawl rack to a front frame board.

2. Your next step is to remove springs (do this carefully with your hand), but do this only when you remove the connecting clips. On removing the connecting pins, go ahead and turn the rocker springs loose.

3. The next line of action is to insert a piece of wood spacer on each side of the loosed rocker spring. The spacer keeps the rocker spring pre-stretched so that you can remove it easily. With the spacers in place, take off three screws so you can remove the floor base.

4. Now, you can remove the racket pawl from the base and ensure you mark its location on the wooden base. You can then unhook the spring from the lever body bottom and disconnect the linkage.

5. Take the linkage and spring, then connect both to a new pawl racket. Reattach the spring back to the base and ensure it’s tight. Remove staples from the bottom carefully and install the racket. Place the staples back, put the base back in and screw them.

6. Ensure you replace the linkage and remove the wooden spacers. Place the recliner back to normal position and test the recliner by pulling the side handle or lever. Now your recliner should be perfectly fit for reclining.

Where to Buy Parts?

You can find parts from third-party E-commerce stores like Amazon. Simply check Amazon’s official page and type in the Lazyboy part (like ratcheting pawl) you want to buy. This displays a whole list of lazyboy recliner parts. Make a purchase and wait for delivery. Also, special stores like IKEA and home depot provide an incredible resource for getting all the Lazyboy recliner parts you need.

Of course you can also checkout Lazyboy’s official website, go over their customer support section and make requests for replacement parts (like the Ratcheting Recline). When buying parts through this means, keep vital information like name, furniture id, furniture type, and special number handy.

Furthermore, there are chances you can get Lazyboy replacement parts from their official dealer where you bought the furniture. However, most retail dealers for Lazyboy recliners focus more on selling furniture than offering service or replacement parts.

Now you know about the ratcheting recline as part of what makes a recliner gives a clicking sound. This functionality allows you to relax your back comfortably fully. Make sure to look through this post to understand how it works, how to assemble and repair tricks whenever it develops a fault.

4 comments | Add One

Leave a Comment